Live Chat
Home » Blog » Data Recovery » How to Recover Data from a Solid State Drive? Know the Best Way
Data Recovery

How to Recover Data from a Solid State Drive? Know the Best Way

Published By Mohit Jha
Tej Pratap Shukla
Approved By Tej Pratap Shukla
Published On November 16th, 2023
Reading Time 6 Minutes Reading

Are you facing data loss on an SSD drive and trying to recover data from a solid state drive? This article will give you detailed information on various causes, symptoms that result in the failure of SSD, and the best solution for data recovery from a solid-state drive.

An SSD is nothing more than soldered microelectronics in a confined space. One of the most positive features of a solid state hard drive is its immutability against any kind of shock. Nevertheless, SSD can also be affected by an accident or defect. The biggest difference is in the way damage occurs compared to ferromagnetic disks.

Table of ContentsHide

Possible Causes of SSD Failure:

  • Faulty components in SSD
  • Damage from Viruses
  • Short circuit or Water Damage
  • Power Outrage
  • Corruption in Data
  • System Failure

Symptoms that Indicate Failure or Defect of SSD

In the below section, we have mentioned some reasons for SSD failure.

  1. When the SSD Suddenly Disappear

    A typical fault pattern for an SSD defect is sudden failure, which usually occurs quite suddenly. This happens due to the installed components, particularly SSD controllers. If you look to recover data from a solid state drive, the controller is the biggest vulnerability of a solid-state disk. Because it is susceptible to overvoltage damage or high ambient temperatures and regulates the complete organization of data in the memory cells of the NAND chips of an SSD.

  2. When the SSD Suddenly Runs Very slowly

    A second drawback, which is rarer, is a high-temperature environment. The typical scenarios here are thermal in nature, in which individual components of the SSD become too hot, but the SSD still works but only runs very slowly. Modern SSD hard drives rely on a so-called 3D memory structure. In contrast to the 2D storage structures of older SSDs, initial scientific studies reveal different temperature susceptibilities.

  3. Firmware Errors and User Errors 

    Not infrequently, a firmware update on a solid-state disk fails or something goes wrong in the update process. Even such scenarios can be associated with data loss and a corresponding defect. Faulty firmware ex-factories are always the best-known example of this: the Intel 8 MB bug, in which suddenly only 8 MB is shown as a physically addressable space.

Typical Symptoms of a Failure in SSD are Shown:

  1. No longer recognized.
  2. Does not start, start or boot anymore.
  3. Very slow data access.
  • Bad File Allocation Tables

Even erroneous file allocation tables do not always have to be a purely logical data problem. Often, this can also be caused by a thermal problem. Users face the problem that a folder is suddenly no longer displayed but as a document or it has completely disappeared or the folder name suddenly consists only of cryptic special characters. There are many reasons for this, ranging from infestation by viruses and Trojans to thermal problems. An excessively high number of damaged memory cells in the NAND flash memory can also be the cause.

  • SSD Getting Very Hot

Heavy heat from a solid state disk is also a clear symptom of major failure within the drive’s power supply. In some scenarios, data access is still possible, but at very slow data transfer rates. In most cases, however, the SSD is no longer recognized by the system. Strong heat development can also have a direct influence on the state of individual cells in the NAND flash. Here, the respective states change 0/1 or individual cells directly suffer a defect and are no longer addressable for the drive.

Backup provides protection and SMART takes control. Since the failure of a solid state disk in most cases happens almost overnight, it is important to create regular backups. We also recommend monitoring the SMART parameters in order to be able to react early in case of temperature problems.

Automatic Solution to Recover Data from a Solid State Drive

Data recovery from a solid-state drive is very time-consuming as well as technological. Each manufacturer cooks their own soup using, for example, very proprietary technology that no longer has much in common with industrial standards. If you ask us what we would recommend for recovering data from a solid-state drive, we will advise you to go for a professional approach, such as the PCVITA SSD Data Recovery Tool. This application can restore all types of data. You can download this utility for any version of Windows.

Download Now Purchase Now

With this software, users can extract data files from NTFS and FAT partition SSD in seconds. This tool can recover file from SSD drives regardless of the number of deleted objects.

Also read: How to Fix SSD Not Showing Up Error? 

Quick Steps to Retrieve Data from SSD Drive

  • Download and launch this utility on any version of Windows.

SSD Data Recovery Tool

  • Now select the scan option to recover data from a solid-state drive.

scan option

  • After that, users can preview their data in the application panel

Preview all data

  • Save it at your desired location, browse the location where you have saved your files and See all your recovered data.

save all data


The blog covers the best solution to recover data from a solid state drive. It discusses various causes and symptoms that indicate that your SSD drive is corrupted. The best solution has also been discussed for the recovery of data from SSD drives.

Can You Recover Data from SSD? – FAQS

Q 1: Can this software recover lost or damaged files?

Yes, SSD recovery software is programmed to scan and recover damaged data from the SSD. These users can also recover data from damaged or formatted drives.

Q 2: How do I recover deleted data from an SSD drive?

Here are some simple tips to recover deleted files from SSD.

  1. Download and install data recovery software.
  2. Connect and scan your SSD drive.
  3. Wait for the scanning process to complete.
  4. Track results and check the data returned.

Q 3: How can I recover data from an SSD that won’t boot?

If you are trying to recover data from an unbootable SSD system, unplug that SSD system from your computer and connect it to another computer. After that, you can scan it with your favorite SSD recovery tool and recover your lost data without any hassle.